Basic Guide to Finding Hidden Valves and Piping
It is important that you know the details of your home like the back of your hand in case you are a homeowner. Finding hidden water as well as gas piping valves is something that you need to look into and know where they are especially if you have to deal with things like emergencies. Below are some of the ways that you can be able to find out where the various valves are located.
There is a high probability that the the gas valves for your home will be located before the gas meter in case you have natural gas. The nub is usually rectangular in shape and uses a wrench but for the most part gas companies usually do not recommend interfering with this valve. If you are looking for a second valve, then you are most likely to find it down the line or where the gas pipe enters.
If you have a gas pipe then the valve will most likely be located in the utility room and will be made from flexible copper. When you have such a piping system you are usually sure that the gas system that you have usually has a high pressure. With the gas system, you are sure that you will find the shut off valve near the water heater or somewhere near the furnace.
There is a high chance that water valves usually have two shut off valves since one is located before the meter and the other located after the meter. Should you be in an environment where it gets really cold then the shut off points is most likely to be located inside the home to prevent things like freezing. There is a high chance that if you live in milder climates, then the water shutoff valve will be located in an underground box with a lid or next to an exterior wall.
If you are finding it hard to find the valves then consider looking at property reports that you got at the last phase of the property purchase. It is important to look keenly at the report since it will show you where the valve is located. With the report, you are able to see the picture of the valves so that you are able to know how they look like so that you can shut them off.
With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. Since such valves usually have metals then you can easily find them by using a metal detector. Even though such valves may not be located exactly where the plans says using the plans is something that will definitely help you to find out where you need to start.
Partner post: try this web-site